Design wall shelves

Modern and particularly flat design wall shelf made of lacquered metal. The 2 mm thick metal shelf has an invisible wall mounting and can be ordered with or without LED lighting. The Ellie wall shelf is only made to order at Novamobili in Italy. Colours: The surface of the Ellie wall shelf is available in 5 different matt lacquer finishes Simply select the desired colour in the configuration menu. Dimensions: The Ellie wall shelf is available in two widths: W 89.9 cm / H 10 cm / D 27.5 cm (D 26 cm effective dimension) W 119.8 cm / H 10 cm / D 27.5 cm (D 26 cm effective dimension) Material thickness 2mm For further dimensions, please refer to the sketch in the picture gallery. Material: The wall shelf is made of bent metal and is painted with a matt water-based paint. Assembly: The shelf is delivered to you fully assembled. A wall bracket is included in the scope of delivery. Please check your wall and use the appropriate wall plugs. The load capacity per running metre is 6 kg. The wall must be sufficiently strong, i.e. it should ideally be a solid load-bearing wall. In the case of a plasterboard wall or similar thin walls, however, a special technique must be used. If in doubt, please ask the architect or landlord about the condition of your walls. The 30W transformer cannot be hidden behind the wall shelf.Please determine where the transformer is to be located during the planning stage. As described, the price always refers to a wall shelf. Please note that only the products described are for sale here, not decorative items or accessories. Colours may be displayed differently depending on monitor settings.

The Livitalia glass wall shelf always goes perfectly with a modern wall unit and its elements, which can be arranged next to or on top of each other, allow a variety of combination options. You can create a particularly impressive effect with optional backlighting. This shelf is only produced to order for you in Italy. The elements of the design glass wall shelf are available as a connecting shelf and as a shelf with storage. The optional LED lighting has a light value of warm 3000 K and is fitted on all four sides. Colours: The designer glass wall shelf from Livitalia is available in smoke colour (Fume). The rear panel, on the other hand, is painted in matt black: Dimensions: The individual elements of the Livitalia glass design wall shelf have the following dimensions: W 45 cm / H 30 cm / D 24.5 cm (shelf with shelf) W 60 cm / H 30 cm / D 24.5 cm (shelf with shelf) W 45 cm / H 30 cm / D 24.5 cm (connecting shelf) W 60 cm / H 30 cm / D 24.5 cm (connecting shelf) The thickness of the wall shelf elements is 10 mm. Materials: The elements of the glass wall shelf are made of glass or lacquered glass. Assembly: The shelves of the Livitalia glass wall shelf are supplied complete and only need to be attached to the wall. Please use wall plugs depending on the condition of the wall. They have an invisible wall bracket with adjustment options (see sketch). The wall must be sufficiently thick, i.e. in the best case it should be a solid load-bearing wall. In the case of a plasterboard wall or similarly thin walls, however, a special technique must be used. If in doubt, please ask the architect or landlord about the condition of your walls. Please also note that only the product described is for sale here, not any decorative items or accessories. Colours may be displayed differently depending on monitor settings.

The minimalist Livitalia Minimal wall unit with an open or closed version is an ideal addition to an existing wall unit or lowboard. Its 45 degree mitred edges are a particular visual treat. This piece of furniture is specially made to order for you in Italy. When ordering, please select the desired module from the drop-down menu. Please take a look at the individual modules in the sketch images. Please note that modules K to M always have a hinged door that opens downwards. The handleless hinged doors can be opened and closed by pressing lightly on the front. Colours: The designer minimal wall unit from Livitalia is available in matt white, matt light grey, matt dark grey or matt black. Dimensions: The individual modules of the Livitalia Minimal wall cabinet have the following dimensions: Module A: W 45 cm / H 15 cm / D 35.2 cm (open) Module B: W 60 cm / H 15 cm / D 35.2 cm (open) Module C: W 90 cm / H 15 cm / D 35.2 cm (open) Module D: W 45 cm / H 22.5 cm / D 35.2 (open) Module E: W 60 cm / H 22.5 cm / D 35.2 cm (open) Module F: W 90 cm / H 22.5 cm / D 35.2 cm (open) Module G: W 30 cm / H 30 cm / D 35.2 cm (open) Module H: W 45 cm / H 30 cm / D 35.2 cm (open) Module I: W 60 cm / H 30 cm / D 35.2 cm (open) Module J: W 90 cm / H 30 cm / D 35.2 cm (open) Module K: W 30 cm / H 30 cm / D 35.2 cm (hinged door) Module L: W 60 cm / H 30 cm / D 35.2 cm (hinged door) Module M: W 90 cm / H 30 cm / D 35.2 cm (hinged door) The thickness of the wall shelf elements is 20 mm. Materials: The elements of the Minimal designer wall unit from Livitalia are made of class E1 chipboard with a non-porous matt lacquer finish. Assembly: The modules of the Livitalia Minimal wall unit are supplied complete and only need to be attached to the wall. Please use dowels depending on the wall condition. The wall must be sufficiently thick, i.e. in the best case it should be a solid load-bearing wall. In the case of a plasterboard wall or similar thin walls, however, a special technique must be used. If in doubt, please ask the architect or landlord about the condition of your walls. Please also note that only the product described is for sale here, not any decorative items or accessories. Colours may be displayed differently depending on monitor settings.

The design of the Ozzio Byblos floor wall shelf is reminiscent of a labyrinth with a mixture of order and chaos. This is emphasised emphasised by the irregular shapes, the supports and the shelves, which constantly which repeatedly break through and change a well-organised geometry. Colours: The Byblos bookshelf is lacquered in matt white. Functions: The modular Ozzio Byblos designer wall shelf can be orientated vertically as well as horizontally - either as a standing shelf or as a hanging wall shelf. Above all, several modules together can create a large shelf for plenty of book storage space. A system for wall mounting is included in the delivery. Dimensions: The Byblos shelving unit from Ozzio has the following dimensions: W 75 cm / D 26 cm / H 216 cm (with vertical mounting) W 216 cm / D 26 cm / H 75 cm (with horizontal mounting) Please note that you are only ordering the basic module here. If you would like to put together an entire shelving wall for yourself, you must increase the quantity in the shopping basket accordingly. Material: The Ozzio Byblos floor shelf is made of thin MDF boards. Assembly: Ozzio ensures that the Byblos wall shelf arrives already arrives fully assembled. It is up to you to assemble the shelf in the desired desired location. Please note that only the product described here is is purchased. Decorative items or accessories are not included. Depending on the monitor the colours may vary. Care instructions: The Ozzio X026 Byblos shelf can be easily cleaned with a damp cleaned with a damp cloth and mild detergent. Avoid aggressive cleaning agents. To prevent streaks, use a microfibre cloth for polishing. for polishing.

The minimalist Livitalia wooden wall shelf with its modules can be easily combined with all of today's modern living room walls. Whether veneer or matt lacquer, the elements of this shelf can be placed next to or on top of each other. They are particularly effective with optional backlighting. There are absolutely no limits to the combination of modules on the living room wall. This shelf is only produced for you to order in Italy. When ordering the Livitalia wood design wall shelf, please select the desired module from the drop-down menu. Please take a look at the individual modules in the sketch images. Please note that modules A to E are always available in a left-hand or right-hand version. The shelves with storage can only be placed next to each other - the other shelves with and without drawers can be placed next to each other or on top of each other. Colours: The designer wooden wall shelf from Livitalia is available in grey oak, brown oak or carbon oak. Or in the matt colours white, black, light grey or dark grey. Dimensions: The individual modules of the Livitalia wooden wall shelf have the following dimensions: Module A: W 45 cm / H 30 cm / D 24.5 cm (right or left) Module B: W 60 cm / H 30 cm / D 24.5 cm (right or left in each case) Module C: W 90 cm / H 30 cm / D 24.5 cm (right or left in each case) Module D: W 60 cm / H 30 cm / D 24.5 (right or left, with pull-out drawer) Module E: W 90 cm / H 30 cm / D 24.5 cm (right or left, with pull-out drawer) Module F: W 45 cm / H 30 cm / D 24.5 cm Module G: W 60 cm / H 30 cm / D 24.5 cm Module H: W 90 cm / H 30 cm / D 24.5 cm Module I: W 120 cm / H 30 cm / D 24.5 cm The pull-out drawers have a width of 197 cm and a depth of 23.5 cm The wall shelf elements are 10 mm thick. Materials: The elements of the wooden design wall shelf from Livitalia are made of class E1 chipboard, finished with oak veneer or a non-porous matt lacquer. Assembly: The modules of the Livitalia wooden wall shelf are supplied complete and only need to be attached to the wall. Please use dowels depending on the wall condition. The wall must be sufficiently thick, i.e. in the best case it should be a solid load-bearing wall. In the case of a plasterboard wall or similar thin walls, however, a special technique must be used. If in doubt, please ask the architect or landlord about the condition of your walls. Please also note that only the product described is for sale here, not any decorative items or accessories. Colours may be displayed differently depending on monitor settings.

The open Livitalia Design wall shelf Tetris can be wonderfully combined with wall units or lowboards in the living room thanks to its minimalist design in ten modules. The individual modules seem to literally float or stick to the wall. The mitred corners cut at an angle of 45 degrees are particularly impressive. This shelf is only produced to order in Italy. When ordering, please select the desired module from the drop-down menu. Please take a look at the individual modules in the sketch images. Please note that there is always a left-hand or right-hand version of a Tetris module. Colours: The Tetris designer shelf is available in six matt lacquered colours and in three wood veneers finished with oak: Light Oak, Grey Oak or Brown Oak. Other colours are also available on request. Dimensions: The individual modules of the Livitalia Tetris wall shelf have the following dimensions: Module A: W 75 cm / H 60 cm / D 35.4 cm (right or left in each case) Module B: W 60 cm / H 75 cm / D 35.4 cm (right or left in each case) Module C: W 75 cm / H 40 cm / D 35.4 cm (right or left in each case) Module D: W 75 cm / H 40 cm / D 35.4 (right or left in each case) Module E: W 90 cm / H 40 cm / D 35.4 cm (right or left in each case) Module F: W 90 cm / H 40 cm / D 35.4 cm (right or left in each case) Module G: W 120 cm / H 40 cm / D 35.4 cm (right or left in each case) Module H: W 120 cm / H 40 cm / D 35.4 cm (right or left) Module I: W 120 cm / H 40 cm / D 35.4 cm (right or left in each case) Module J: W 120 cm / H 40 cm / D 35.4 cm (right or left in each case) The thickness of the wall shelf elements is 15 mm. Materials: The elements of the Tetris wall shelf are made of class E1 chipboard or are finished with oak veneer or have a non-porous matt lacquer. Assembly: The modules of the open Tetris wall shelf are supplied complete and only need to be attached to the wall. They can also be combined with a lowboard or wall unit. Please use wall plugs depending on the condition of the wall. The Tetris modules have an invisible wall bracket with adjustment options (see sketch). The wall must be sufficiently strong, i.e. it should ideally be a solid load-bearing wall. In the case of a plasterboard wall or similarly thin walls, however, a special technique must be used. If in doubt, please ask the architect or landlord about the condition of your walls. Please also note that only the product described is for sale here, not any decorative items or accessories. Colours may be displayed differently depending on monitor settings.

Ingenious Butterfly design wall shelf from Novamobili. Thanks to its size, it offers plenty of space for accessories and books. If there is not enough space, the Butterfly wall shelf can easily be extended indefinitely with another Butterfly module or one of the many wall units. Visually, a wall unit can be created if desired, as shown in our illustrations. The Butterfly wall shelf can be hung horizontally or vertically. Colours: Picture one shows the Butterfly wall shelf in Quarzo dark grey matt. The wall shelf is available in 5 matt colour finishes: White (similar to RAL 9016). Light grey (similar to RAL7035), sand (similar to RAL1019), quartz (similar to RAL7016) or black (similar to RAL 9017). Dimensions: The Butterfly wall shelf has the following dimensions: W 180 cm / H 24 cm / D 26 cm The exact size of individual compartments is available on request. Material: The Butterfly wall shelf is made of high-quality class E1 chipboard with low formaldehyde emission values. Assembly: Novamobili The wall shelf is supplied with wall fittings, screws and instructions. Please use wall plugs depending on the condition of the wall. The wall must be sufficiently strong, i.e. it should ideally be a solid load-bearing wall. With a plasterboard wall or similarly thin walls, however, a special technique must be used. If in doubt, please ask the architect or landlord about the condition of your walls. Please note that only the product described is for sale here, not any decorative items or accessories. Colours may be displayed differently depending on monitor settings.

Modular wall shelf system Horizon from Novamobili. The design wall shelf is available in 6 different widths. Optionally with or without back panel. The shelving system can be extended as required by adding another module. The Horizon wall shelf is only made to order by Novamobili in Italy. The price always refers to a wall shelf with or without a back panel. Colours: The surface of the Horizon wall shelf is available in 5 different matt colour finishes. Simply select the desired colour in the configuration menu. Dimensions: The wall shelf Horizon is available in 6 widths: 59.8 cm 89.8 cm 119.8 cm 134.8 cm 149.8 cm 179.8 cm Material thickness board 3.6 cm Optional rear panel thickness: 1.8 cm Usable storage surface in depth without wall panel: 26 cm Usable storage surface in depth without wall panel: 24.2 cm For further dimensions, please refer to the sketch in the picture gallery. Material: The wall shelf is made of MDF and is finished with a matt water-based paint. Assembly: The shelf comes to you fully assembled. The wall shelf is supplied with a wall bracket. Please check your wall and use the appropriate wall plugs. The maximum load per linear metre is 6 kg. The wall must be sufficiently strong, i.e. it should ideally be a solid load-bearing wall. In the case of a plasterboard wall or similarly thin walls, however, a special technique must be used. If in doubt, please ask the architect or landlord about the condition of your walls. As described, the price always refers to one wall board. Please note that only the products described are for sale here, not decorative items or accessories. Colours may be displayed differently depending on monitor settings.

The Hub System from Novamobili is a metal wall box that can be positioned anywhere on the wall. The thin metal makes it particularly light and minimalist. The wall box is available in 2 widths. The rear panel can be painted in a different colour as an option. The Hub metal box is only made to order from Novamobili in Italy. Colours: The Hub wall box is available in 6 different matt paint finishes. The back panel can be ordered either lacquered in the same colour or in oak or elm wood effect. Dimensions: The Hub wall box is available in 2 widths and 2 depths: W 26.8 cm / D 27.3 cm W 26.8 cm / D 36 cm W 41.8 cm / D 27.3 cm W 41.8 cm / D 36 cm The height is always 28.6 cm. Material: The wall box is made of 2 mm thick metal with a matt lacquer finish. The back panel is 1.2 cm thick and made of MDF. Assembly: The wall box is supplied assembled with a wall bracket. Please check your wall and use suitable wall plugs for mounting. Please note that only the products described are for sale here, not decorative items or accessories. Colours may be displayed differently depending on monitor settings. The price refers to one wall box. The interior surfaces of the wall box may have areas with stained sheet metal. The paintwork is not perfectly smooth to the touch. This must be accepted as a product characteristic and therefore a given.

The Livitalia design wall shelf is a good addition to all TV lowboards and wall units. The wall shelf is available in several widths and can be combined with various wall units to create a customised wall unit. Individually, the wall shelf can also be used as a shelf or desk. Colours: The flat wall shelf is available in 4 standard colours and 3 wood veneers: White (similar to RAL 9016)Black (similar to RAL 9011)Dark grey (similar to RAL 7043)Light grey (similar to RAL 7044) Each colour can be lacquered in matt or high gloss. The wall shelf is also available in the following veneers to match our lowboards: Light oakBrown oakGrey oak Dimensions: The design wall shelf is available in the following dimensions: Widths: 90, 120, 150, 180, 210, 240, 270, 300 cm Depth: 33, 45 or 54 cm The thickness of the bench is 6 cm Assembly: The wall shelf comes pre-assembled to your home. Depending on the width, between 2 and 4 brackets are included. These rods are screwed to the wall and the wall board is pushed on from the front so that the bracket is no longer visible. The wall board can withstand approx. 15 kg per metre, please use wall plugs depending on the wall condition. The wall must be sufficiently strong, i.e. it should ideally be a solid load-bearing wall. In the case of a plasterboard wall or similarly thin walls, however, a special technique must be used. If in doubt, please ask the architect or landlord about the condition of your walls. Please note that only the product described is for sale here, not any decorative items or accessories. Colours may be displayed differently depending on monitor settings.

Unique wall shelf for the kitchen, hallway or living room. The Novamobili Outline shelf consists of a metal cage with internal panelling. The Outline shelf is optionally available in 4 widths and can be hung modularly as shown in the picture gallery and can also be combined with closed elements (on request). Each Outline wall shelf is only produced to order in Italy by Novamobili. The price refers to one wall shelf. Colours: The Outline wall shelf is available in 5 different matt colour finishes. The interior panelling can be ordered either lacquered in the same colour or in a wood look (white oak, dark elm or veneered natural oak). The colours can be found in the picture gallery. Dimensions: The Outline shelf is available in 4 widths: W 30 cm / H 32 cm / D 28.3 cm W 60 cm / H 32 cm / D 28.3 cm W 90 cm / H 32 cm / D 28.3 cm W 120 cm / H 32 cm / D 28.3 cm The frame has a thickness of 1.5 x 1.5 cm Material: The Outline wall shelf is made of metal. The interior panelling is made of class E1 chipboard. Assembly: The wall shelf is supplied assembled with a wall bracket. Please check your wall and use suitable wall plugs for installation. The wall must be sufficiently thick, i.e. in the best case it should be a solid load-bearing wall. In the case of a plasterboard wall or similar thin walls, however, a special technique must be used. If in doubt, please ask the architect or landlord about the condition of your walls. Please note that only the products described are for sale here, not decorative items or accessories. Colours may be displayed differently depending on monitor settings.

Vertical design bookcase Libro by MEME DESIGN Italy. 3 coloured shelves that can be repositioned to create an individual design according to the customer's wishes. Due to its vertical alignment on the wall, the shelf does not take up much space and can therefore also be placed on small walls and offers space-saving storage space. The design wall shelf is only made to order for you in Italy. Colours: The Libro bookcase is painted in one of 13 RAL colours. Dimensions: W 29 cm / H 156 cm / D 29 cm Material: The Libro designer bookcase is made entirely of metal. Assembly: Please use wall plugs depending on the condition of the wall. The wall must be sufficiently strong, i.e. should ideally be a solid load-bearing wall. With a plasterboard wall or similar thin walls, however, a special technique must be used. If in doubt, please ask the architect or landlord about the condition of your walls. Please also note that only the product described is for sale here, not any decorative items or accessories. Colours may be displayed differently depending on monitor settings.

The Novamobili Reverse TV wall panel is a wonderful presentation surface for your high-quality flat screen. Create that cinema feeling in the middle of your own home. Without much effort, but with a high-quality piece of furniture made in Italy. The high-quality design panel nestles elegantly against your wall and also offers you plenty of space for your favourite films on DVD, as practical shelves are cleverly hidden behind the panel on the left and right across the entire height of the panel. There is also a matching Reverse lowboard configurator. Functions: The Novamobili Reverse TV wall panel is available in six different sizes, suitable for any flat screen from 32 to 60 inches. For secure screen mounting, the panel is equipped with pre-drilled holes to which you can attach your TV using a VESA standardised, non-adjustable TV mount. You then guide the device cables through the cable outlet, which has also already been prepared, to the rear through the panel in the direction of the socket. This means that no cables are visible from the front. Optionally, you can also opt for LED lighting, which you can attach in the form of a light strip in the shelf area, for example. This not only puts your classic DVD films in the right light, but also provides discreet, romantic, indirect lighting in the room. The LED lighting is switched on by plugging the transformer into a socket. Alternatively, the transformer can be connected to a light switch by an electrician. Optionally, the LED lighting can be controlled via WLAN using a WLAN socket. Colours: The surface of the elegant TV panel is melamine-coated and particularly light-resistant. This means that the colour quality of the high-quality design furniture is permanently retained. We supply the Novamobili Reverse TV wall panel in the colour dark elm , which has a wonderfully natural, high-quality wood look , as well as in 5 different matt lacquer finishes. You can find your desired colour in the picture above. Dimensions: The panel is available in the following different sizes. Simply select the right model for you from the drop-down menu above. W 120 cm / H 96 cm / D 18.4 cm W 150 cm / H 96 cm / D 18.4 cm W 180 cm / H 96 cm / D 18.4 cm W 120 cm / H 120 cm / D 18.4 cm W 150 cm / H 120 cm / D 18.4 cm W 180 cm / H 120 cm / D 18.4 cm Panel thickness: 1.2 cm Shelf thickness: 1.2 cm Material: The Novamobili Reverse TV panel is made of high-quality chipboard with a robust plastic veneer. In the interests of sustainable production, the entire carcass is coated with an environmentally friendly paint that is certified with the EU ECO label. Assembly: We deliver your desired panel pre-assembled. All you have to do is mount it on the wall - and your new designer piece of furniture is ready for use! The assembly material required for the final touches is included in the scope of delivery. However, please make sure to mount the panel on a stable wall. Please use dowels depending on the wall condition. The wall must be sufficiently strong, i.e. it should ideally be a solid load-bearing wall. With a plasterboard wall or similarly thin walls, however, a special technique must be used. If in doubt, please ask the architect or landlord about the condition of your walls. Please note that only the TV furniture described is for sale here, not any decorative items or accessories. Colours may be displayed differently depending on the monitor settings.

Unique design wall shelf Innesto from MEME DESIGN Italy. The slim metal wall shelf can be hung horizontally or vertically. Interesting wall decorations can be created quickly and easily by combining several shelves. The design bookcase is only made to order for you in Italy. Colours: The Innesto bookcase is painted in one of 13 RAL colours. Dimensions: W 120 cm / H 30 cm / D 25 cm Compartment size: W 30x30 cm Material: The MEME DESIGN Innesto bookcase is made entirely of metal. Assembly: Please use wall plugs depending on the condition of the wall. The wall must be sufficiently strong, i.e. should ideally be a solid load-bearing wall. With a plasterboard wall or similar thin walls, however, a special technique must be used. If in doubt, please ask the architect or landlord about the condition of your walls. Please also note that only the product described is for sale here, not any decorative items or accessories. Colours may be displayed differently depending on monitor settings.