Modern, transparent TV design plinth for TV lowboards from Livitalia. If wall mounting is not possible, this transparent plinth can be used to create a floating effect. The transparent methacrylate feet allow the light to shine through and appear almost invisible. Functions: This plinth can be combined with all floor-standing wooden, box and Vesa lowboards from Livitalia. The lowboard depth should be 45 or 54 cm. Please note: Always select the same plinth width as your lowboard. The plinth is always automatically a little shorter so that the feet are not exactly at the ends! The plinth has a black metal frame that is screwed to the underside of the lowboard. With a depth of 39.7 cm, the plinth has a shallower depth than the lowboard and is therefore barely visible. There is a third, height-adjustable leg in the centre. This prevents bending under heavy loads. Optional LED lighting (3000K) can be ordered under the base. The LED lighting is switched on by plugging the transformer into a socket. Alternatively, the transformer can be connected to a light switch by an electrician. Optionally available, the LED lighting can be controlled via WLAN using a WLAN socket. Dimensions: The transparent TV plinth is available in the following widths: 120, 150, 180, 210, 240, 270, 300, 330 and 360 cm The methacrylate base is available in heights of 8 or 12 cm .The feet are indented 15 cm from the right and left. Assembly: You are only purchasing the TV plinth on this page, not the TV lowboard or other furniture shown. Please also note that only the product described is for sale here, not any decorative items or accessories. Colours may be displayed differently depending on monitor settings.

Our wooden design lowboards impress with their minimalist design and beautiful wood grain. Customised to your wishes, each lowboard fits seamlessly into your living room. Each wooden lowboard is made to order for you in Italy. As a further option, we can also recommend the Livitalia Box TV lowboard configurator in black matt for hanging AV receivers with a depth of 54 cm. Colours: Just the right colour for every living room, our veneers are clearly distinguishable: Light Oak with real knot inclusions, Grey Oak with a shimmering silver grain and Brown Oak with yellowish longitudinal stripes. Not only the exterior, but also the interior is finished with high-quality wood veneer. The beautiful wood grain is set off to perfection by a 35 mm thick front. Functions: The lowboard is available in different versions and always has a continuous cover panel. Simply click on Start configuration and select your desired lowboard step by step. You can choose from three high-quality wood veneers. Handleless fronts for a flawless lowboard: The front of the hinged door protrudes slightly above the cover panel, making it easy to open without a handle. The textured surface also means that fingerprints remain undetected. Once opened, the hinged door is gently cushioned by hydraulic dampers. Dimensions: Proportional dimensions for a perfect design lowboard. Whether a piece of TV furniture looks good is not only determined by the surface, the proportions must also be right: Widths: 120, 150, 180, 240, 270 or 300 cm Height (without feet): 24 cm or 32 cm Depths: 46.5 cm or 56.1 cm Internal dimensions: H 18/26 cm | D 41/50.6 cm Material thickness: 2 cm Cover plate thickness: 1.5 cm Hinged door thickness: 3.5 cm Foot height: 1.5 cm The cover shelf always consists of one piece and has the same width as the lowboard. Depending on the width, this lowboard can be ordered with customised fittings. Would you like to place a DVD player or an AV receiver in your new TV lowboard or do you need a cable duct? No problem! A personal advisor will contact you after the purchase and discuss the optimum cable duct position with you. All cable ducts are included in the price. Professionally pre-assembled and delivered on time. You can choose from shelves, cable ducts or drawers. Best of all, all extras are already included in the price. Assembly: Professionally pre-assembled and delivered by appointment. Each lowboard is delivered pre-assembled. Only the continuous cover plate needs to be placed on the elements and screwed in place. A wall mounting set is included in the delivery for hanging lowboards. Please use wall plugs depending on the condition of the wall. Delivery is free of charge and is carried to your home by a 2-man service. If you don't want to do the wall mounting yourself, you can book professional installation in the shopping basket. The wall must be sufficiently thick, i.e. it should ideally be a solid load-bearing wall. In the case of a plasterboard wall or similarly thin walls, however, a special technique must be used. If in doubt, please ask the architect or landlord about the condition of your walls. Please also note that only the product described is for sale here, not any decorative items or accessories. Colours may be displayed differently depending on monitor settings.

Whether country house style, baroque or minimalist, the box design lowboard from the Italian manufacturer Livitalia blends in very well with any existing living environment. With no handles and always with an elegant continuous cover plate, the design is particularly clear and modern. The great choice of colours and the many dimensions make it the first choice for many design lovers. Colours: The colour is automatically applied to the furniture in several layers. There are 5 popular colours to choose from, including the classics: white or black. All colours are available in elegant matt, which has a particularly velvety and soft effect, or in radiant high gloss for a breathtaking presence. Simply choose between matt & high gloss in the lowboard configurator and see the difference. In matt you also get all available RAL colours - simply tell your consultant your RAL number after purchase. Customised lacquering in high gloss or matt as required Functions: Each lowboard is produced exclusively for you. Simply flexible - wall-mounted or floor-standing - you decide! Our popular box lowboard is available in two versions to suit your requirements: Floor-standing or suspended. Each lowboard consists of 1, 2 or 3 hinged door elements. The handleless hinged doors are always opened and closed with light pressure on the front. High-quality hydraulic pistons allow the door to slide down gently. Not only CDs, DVDs or Blue Rays can be stored behind the hinged doors, but also hi-fi equipment such as DVD players, satellite or AV receivers. No more cable clutter thanks to well thought-out cable ducts To ensure that your devices are supplied with power and can be connected to the TV on the lowboard, you can request a cable duct in the cover panel, rear panel, partitions or side panel. A personal advisor will contact you after your purchase and discuss the optimum cable duct position with you. All cable ducts are included in the price. Professionally pre-assembled and delivered on time. Dimensions: Exactly the right dimensions for your living room - because we know what you need Thanks to the outstanding modular system, virtually any size is possible. We have provided the most popular dimensions for you in our lowboard configurator. Carcase height (without legs): 24 cm or 32 cmWidths: 120, 150, 180, 210, 240, 270 or 300 cmDepths: 35.4 cm or 54.6 cmInternal dimensions: H 19.9/27.9 | D 31.4/50.6 cmMaterial thickness: 2 cmCover panel thickness: 1.5 cmHinged door thickness: 2 cmFoot height: 1.5 cm The cover plate is always in one piece for all widths. Assembly: Professionally pre-assembled and delivered on time. Whether 120 cm or 300 cm wide, the box lowboard is delivered to your home pre-assembled. Each hinged door element is completely pre-assembled and, depending on the width, only needs to be placed next to or hung with the other elements. Then simply place the cover plate over all the elements and screw it in place from the inside. Please note that the appropriate dowel must be used depending on the wall. Only standard concrete dowels are included in the scope of delivery. All painted surfaces are covered with a protective film to ensure safe despatch. Before each delivery, the shipping company will contact you to arrange a personal appointment. Optionally, you can also book a professional installation service for wall mounting in the shopping basket. Please also note that only the described product can be purchased here, not any decorative items or accessories. Colours may be displayed differently depending on the monitor settings.

Individual, discreet and unique: the perfect TV lowboard. The Novamobili Reverse lowboard not only impresses with its linear and modern design, but above all with its customisable handle notch. On request, the lowboard is available for wall mounting or as a floor-standing version in 4 widths. The lowboard can be painted in 6 matt or high-gloss colours to suit your requirements. The Reverse lowboard is only made exclusively to order for you! The Reverse TV wall panel and the Reverse sideboard are also available in matching colours. Colours: Because every lowboard is only produced to order, you can decide what colour you want your new lowboard to be. The fronts, side panels and top panel can be painted in one of 5 modern colours. In a choice of high-gloss or matt colours. The handle notches always match the colour of the carcase. Configure now and discover your favourite combination! Dimensions: The right size for every room The Reverse lowboard is available in 4 widths: 120 cm - 1x hinged door180 cm - 1x hinged door + 1x drawer240 cm - 1x flap door + 1x drawer300 cm - 1x drawer + 1x flap door + 1x drawer Depths: 37.4 cm or 51.8 cmInternal dimensions: 30.5 | D 34.7/49.1 cmMaterial thickness: 1.8 cmHinged door thickness: 2.2 cmCabinet height + cover shelf: 42.6 cmLeg height: 2.1 cm (does not apply to the lowboard for wall mounting) Easy storage of appliances in the lowboard thanks to the cable duct. If you own a large number of appliances and don't have enough space, you can store them all quickly and easily in the lowboard. Thanks to the cable duct in the cover panel, rear panel and side panel, all appliances can be easily connected to each other. After ordering, your personal advisor will contact you and discuss the customised cable ducts with you. All cable ducts are included in the price. Assembly: Professionally pre-assembled and delivered on time and free of charge. Each lowboard is delivered pre-assembled. All you have to do is place or hang the individual elements next to each other and screw on the handle strip and cover plate. On request, lowboards of different widths can also be combined with each other to achieve widths greater than 3 metres. Optionally, you can also book the assembly by a professional assembly team in the shopping basket. Please use dowels depending on the wall composition. The wall must be sufficiently strong, i.e. should ideally be a solid load-bearing wall. With a plasterboard wall or similar thin walls, however, a special technique must be used. If in doubt, please ask the architect or landlord about the condition of your walls. Please also note that only the product described is for sale here, not any decorative items or accessories. Colours may be displayed differently depending on monitor settings.

The Mobius 005 design lowboard by Al2 from Greece has a slightly different design to the conventional TV boards on the market. It impresses with its slender legs and an open front that can be used optimally for electronic devices. There is a drawer in the centre that can be opened and closed by pressing on the front. The drawer front is made of smoked eucalyptus veneer and provides a sophisticated touch. The width and carcase colour can be adjusted as required. Each TV Mobius 005 design lowboard is then produced in Greece according to your wishes. Please note that the front, the inside of the open compartments and the legs are always lacquered in the same colour. Only the drawer is finished with eucalyptus wood. The Mobius 004 lowboard, the Mobius 002 sideboard and the Mobius 001 dining table are also available from this series to match the Mobius 005 designer lowboard. If you are looking for another 200 cm wide TV lowboard in white for the floor, you can alternatively take a look at the al2 MOS-I-KO 005 B lowboard. Dimensions: The Mobius 005 design TV lowboard is available in 5 widths: W 160 cm / H 50 cm / D 50 cmWidth of the drawer: 56 cmWidth of the open compartments: 30 | 31 | 29 cm W 180 cm / H 50 cm / D 50 cmWidth of drawer: 64 cmWidths of the open compartments: 32 | 36 | 34 cm W 200 cm / H 50 cm / D 50 cmWidth of drawer: 72 cmWidths of the open compartments: 36 | 40 | 38 cm W 225 cm / H 50 cm / D 50 cmWidth of drawer: 82 cmWidths of the open compartments: 41 | 45 | 43 cm W 250 cm / H 50 cm / D 50 cmWidth of drawer: 92 cmWidths of the open compartments: 46 | 50 | 48 cm Height of legs: 25 cm Interior height: 21.1 cm A cable aperture for electronic devices can be drilled into the rear wall on request. Material and colours: The body of the al2 TV design lowboard is made of high-quality chipboard. It is available in various matt colours . You can choose from the most popular finishes: white, black, dark grey or light grey. Other colours are available on request. The narrow legs of the lowboard are made of metal and also have a matt lacquer finish. Assembly: We deliver the al2 Design Lowboard Mobius 005 already partially pre-assembled. The lowboard only needs to be connected to the plinth. You can optionally book assembly in the shopping basket. Please also note that only the described product is available for purchase here, no decorative items or accessories. Colours may be displayed differently depending on the monitor settings.

The handleless Livitalia Minimal lowboard stands on slender legs and has an open compartment that can be lacquered in several colours. The special feature of this compartment is the mitred corners at an angle of 45 degrees. Every hanging or floor-standing Minimal lowboard is made to order for you in Italy. Colours: The Livitalia Design Minimal lowboard is available in dark oak for the body and front, while the open compartment is available in 5 matt colours. The base frame is available in anthracite. Individual lacquering in other matt colours is possible on request. Functions: Each Minimal lowboard from Livitalia consists of 1 flap door element and an open compartment. The handleless flap door is always opened and closed with light pressure on the front. High-quality hydraulic pistons allow the door to slide down smoothly. Not only CDs, DVDs or Blue Rays can be stored behind the hinged doors, but also hi-fi devices such as DVD players, satellite or AV receivers. So that your devices can be supplied with power and connected to the TV set on the lowboard, you can have a cable duct in the cover panel, rear panel, partition or side panel on request. A personal advisor will contact you after your purchase and discuss the optimum cable duct position with you. All cable ducts are included in the price. Dimensions: The Livitalia designer lowboard Minimal is available in the following dimensions: W 120 cm / H 37.5 cm / D 45.2 cm (hanging) W 120 cm / H 52.5 cm / D 45.2 cm (floor-standing) W 150 cm / H 37.5 cm / D 45.2 cm (suspended) W 150 cm / H 52.5 cm / D 45.2 cm (floor-standing) W 180 cm / H 37.5 cm / D 45.2 cm (suspended) W 180 cm / H 52.5 cm / D 45.2 cm (floor-standing) W 210 cm / H 37.5 cm / D 45.2 cm (suspended) W 210 cm / H 52.5 cm / D 45.2 cm (floor-standing) Interior dimensions of open compartment: W 26 cm / H 33.5 cm / D 43.2 cm The floor-standing lowboard stands on a 15 cm high plinth Materials: The body and front of the Livitalia Minimal lowboard are made of high-quality chipboard. The open compartment also has a synthetic coating. The base frame is made of steel Assembly: Professionally pre-assembled. Whether 120 cm or 210 cm wide, the Minimal lowboard is delivered to your home pre-assembled. Each hinged door element is completely pre-assembled and, depending on the width, only needs to be placed next to or hung with the other elements. The cover plate is then simply placed over all the elements and screwed together from the inside. Please note that the appropriate dowel must be used depending on the wall. Only standard concrete dowels are included in the scope of delivery. All painted surfaces are covered with a protective film to ensure safe despatch. The shipping company will contact you before each delivery and arrange a personal appointment with you. Optionally, you can also book a professional installation service for wall mounting in the shopping basket. Please also note that only the product described is available for purchase here, not any decorative items or accessories. Colours may be displayed differently depending on monitor settings.

Modern design TV lowboard from al2 from Greece. The lowboard has a drawer in the centre and open compartments for electronic devices on the right and left. The drawer is opened by pressing lightly on the front. The drawer front and the feet are always lacquered in the same colour. The legs have a metal frame painted in the same colour as the body. The e-klipse series also includes the e-klipse 008 lowboard, the e-klipse 003 sideboard and the e-klipse 009 highboard. Dimensions: The e-klipse 005 TV design lowboard is available in 5 widths: W 160 cm / H 50 cm / D 50 cmWidth of the drawer: 56 cmWidth of the open compartments: 30 | 31 | 29 cm W 180 cm / H 50 cm / D 50 cmWidth of drawer: 64 cmWidths of the open compartments: 32 | 36 | 34 cm W 200 cm / H 50 cm / D 50 cmWidth of drawer: 72 cmWidths of the open compartments: 36 | 40 | 38 cm W 225 cm / H 50 cm / D 50 cmWidth of drawer: 82 cmWidths of open compartments: 41 | 45 | 43 cm W 250 cm / H 50 cm / D 50 cmWidth of drawer: 92 cmWidths of open compartments: 46 | 50 | 48 cm Height of legs: 25 cm Interior height: 21.1 cm A cable aperture for electronic devices can be drilled into the rear wall on request. Material and colours: The body of the al2 Design lowboard is made of high-quality chipboard. It is available in various matt colours . You can choose from the most popular finishes: white, black, dark grey and light grey. Other colours are available on request. Assembly: We deliver the al2 lowboard already partially pre-assembled. The lowboard only needs to be connected to the plinth. You can optionally book assembly in the shopping basket. Please also note that only the described product is available for purchase here, no decorative items or accessories. Colours may be displayed differently depending on the monitor settings.

Livitalia Open design lowboard from Italy with open hi-fi compartment for easy access. Each Open lowboard is only made to order for you in Italy. The lowboard can be ordered with or without a swivelling TV mount. For a particularly light design, the open lowboard stands on 12 cm high, transparent legs. If you are looking for a designer TV lowboard for 75 inch televisions, the Livitalia wooden lowboard configurator can be a good alternative. Dimensions: The open lowboard is available in two heights: Total height 48 cm | flap door heights 24 cm Total height 56 cm | flap door height 32 cm The lowboard is available in 3 widths: Width: 240, 270 or 300 cm Open compartment: W 58 cm 2x H 13 cm Maximum TV size for TV mount: 75 inches.The depth of the open lowboard is 54.6 cm. Further dimensions: Internal dimensions hinged door element: H 19.9/27.9 cm | D 31.4/50.6 cm Hinged door thickness: 2 cm Base height: 12 cm You can decide in the drop-down menu whether the unit should be produced for you with TV on the right or mirrored on the left as shown. Colour: The open lowboard is supplied as shown. The hinged door element and the open compartment are lacquered in matt light beige (similar to RAL1013) and the TV board in brown oak. Brown oak is a real wood veneer which receives its beautiful brown colour through heat treatment. Other colour combinations are also available on request. Assembly: The lowboard is delivered to you disassembled. Assembly can be added in the shopping basket. All lacquered surfaces are covered with a protective film to ensure safe shipping. Before each delivery, the forwarding agent will contact you to arrange a personal appointment. Please note that you are only purchasing the product described here, not any other modules, decorative items or accessories. Colours may be displayed differently depending on monitor settings. Further wall units are available on request.

The Vesa design TV lowboard from Livitalia has an integrated TV mount that allows all cables to be concealed inside the lowboard. Thanks to the integrated column, you don't need any complicated cable routing in or on the wall. The TV column can also be rotated and optimally aligned to the seating position. The Livitalia Box TV lowboard configurator in black for 85 inch televisions can be a good alternative. Colours: White (similar to RAL9010), black (similar to RAL9011), light grey (similar to RAL7044), dark grey (similar to RAL7043) - each in matt or high gloss Functions: The TV mount accepts all TV sets with VESA standard 200x200 and 400x400. You can find more information in the picture gallery. TV sizes: 32-65 inchmaximum weight: 25kgCurved TV possible: yes Each lowboard with bracket is only produced to order for you in Italy. The TV lowboard can be easily customised to your requirements. You can choose between floor or wall mounting. Thefloor-standing version stands on 1.5 cm high plastic feet, which are height-adjustable to compensate for any unevenness in the floor. The feet are offset inwards and are not visible from the outside due to their low height. The wall bracket is already fitted to the piece of furniture in the hanging wall version. For further information, please refer to the sketch in the picture gallery. The lowboard with TV mount always has hinged doors. These are opened and closed without handles by pressing lightly on the front. Hydraulic pistons dampen the door and ensure quiet opening. The division of the hinged doors varies depending on the width. Please refer to the sketch in the picture gallery for the width and layout. In addition to the column TV mount on the lowboard, further cable apertures can be drilled in the cover plate and in the base. After ordering, a personal advisor will contact you and discuss all cable outlets with you. Dimensions: The lowboard with TV holder is available in the following versions: Width: 120, 150, 180, 210, 240, 270 or 300 cm Height: 24 or 32 (carcase height without legs) Depth: 45 or 54.6 cm From a width of 180 cm, the position of the TV bracket can be determined - to the left or to the right. You can easily calculate the internal dimensions based on the desired dimensions and wall thicknesses. Inside width: total width minus 4 cm Internal height: Cabinet height minus 6.1 cm Depth: Depth minus 4 cm To attach the TV set to the TV mount, you will need the appropriate screws for your TV set. These are not included in the scope of delivery! We recommend buying a universal set: here Assembly: Each Vesa lowboard is supplied pre-assembled. The individual elements only need to be placed or hung next to each other and the continuous cover plate screwed in place. The TV bracket still needs to be inserted for transport reasons. Please use wall plugs depending on the condition of the wall. You can optionally book professional installation in the shopping basket. The wall must be sufficiently strong, i.e. it should ideally be a solid load-bearing wall. With a plasterboard wall or similarly thin walls, however, a special technique must be used. If in doubt, please ask the architect or landlord about the condition of your walls. Please also note that only the product described is for sale here, not any decorative items or accessories. Colours may be displayed differently depending on monitor settings.

The al2 design lowboard MOS-I-KO 005 B unfolds its modern retro elegance over a width of 150 to 250 cm. The wonderful combination of matt lacquered board and elegant legs made of solid, natural wood make this high-quality piece of furniture particularly appealing. Here too, the experienced designers at the traditional Greek company al2 have focussed on design, functionality and exclusivity. This TV lowboard embodies an exemplary modern living ambience and also offers enough space in its three drawers to clearly organise accessories for televisions or hi-fi equipment. The MOS-I-KO 003 A sideboard and the MOS-I-KO 003 B sideboard are also available to match the MOS-I-KO 005 B designer lowboard. Colours: We supply the body of the designer piece of furniture in 4 different matt lacquer finishes (white, black, light grey, dark grey). The inside of the drawers is also lacquered in the body colour. The legs are available in solid oak or solid walnut. Functions: The al2 TV design furniture MOS-I-KO 005 B has a total of three drawers: The two on the left have a width of 100 cm each, the drawer on the right is 50 cm wide (for a width of 250 cm). For widths of 150, 175, 200 or 225 cm, the widths of the three drawers are correspondingly smaller. There are no handles on the entire front of the lowboard. Instead, the drawers are operated using the so-called push-to-open function . This means that the drawers can be opened slowly by gently pressing on the front and closed again in the same way. Dimensions: W 250 cm / H 50 cm / D 50 cmW 225 cm / H 50 cm / D 50 cmW 200 cm / H 50 cm / D 50 cmW 175 cm / H 50 cm / D 50 cmW 150 cm / H 50 cm / D 50 cm Feet: H approx. 25 cm Material: The body of the al2 Design lowboard MOS-I-KO 005 B is made of high-quality chipboard. Its tile-like structure is particularly eye-catching. The front, carcase and drawer interiors are matt lacquered, while the solid frame is not lacquered. The legs are made from solid oak or solid walnut, so the natural colouring and grain are retained and create wonderful design accents. Assembly: We deliver your new lowboard pre-assembled. All you have to do is fit the feet. The assembly material required to attach them is already included in the scope of delivery. Please also note that only the product described is for sale here, no decorative items or accessories. Colours may be displayed differently depending on monitor settings.

The Vision lowboard with 90° swivelling TV panel is ideal for any living room with an adjoining dining room. The panel can simply be swivelled away from the wall like a flag so that the TV can be viewed at a better angle. Colour: The Livitalia Vision design lowboard with 90° swivel TV panel is available in various colours. The lowboard can be ordered in either white (similar to RAL9016) or black matt (similar to RAL9011). Alternatively, the lowboard is finished with high-quality real wood veneer and is available in light oak or tone oak (as illustrated) . The TV panel is available in the same colours as the lowboard. Functions: The hinged door can be opened by pressing on the front. Inside there is a partition wall and a tube that connects the cables of the devices inside the lowboard to the TV. The TV panel can be swivelled by up to 90°. The swivelling Vision TV panel has a width of 115 cm and can be fitted with a maximum TV set size of 50 inches. A mount of your choice can be attached to the panel. Inside the TV panel there is a flag-shaped steel support that provides the necessary stability. The TV panel can be ordered as a right or left sw ivel. Please select this from the drop-down menu. For further information, please refer to the sketch in the picture gallery. Dimensions: The TV lowboard is available in the following sizes:Width: 120 / 150 cmHeight: 33.5 cm Depth: 45 / 54.6 cm 115x84 cm for up to 50 inch televisions Further dimensions:Internal dimensions: H 31 | D 31.4/50.6 cmMaterial thickness: 2 cmHinged door thickness: 2 cmLeg height: 1.5 cm Technical details: The hinged door is gently braked by hydraulic pistons. The hinges can be adjusted so that the door closes perfectly and the gaps are even. The lowboard stands on height-adjustable feet that can compensate for slight unevenness. The TV panel can be opened at the back so that all cables can be neatly routed and the TV can be screwed to the panel. The TV bracket for mounting the TV on the panel is not included and must be ordered separately depending on the TV model. We recommend the HAMA ULTRASLM TV bracket; this fits many TV models very well. Mounting: The lowboard comes to you fully assembled, only the Vision panel needs to be mounted. As the Vision panel with TV has a high dead weight, it must be fixed to the wall if it is standing alone. Alternatively, the Vision panel can be extended with an additional 90, 120 or 150 cm hinged door module, making it more stable. All painted surfaces are covered with a protective film to ensure safe shipping. Before each delivery, the shipping company will contact you to arrange a personal appointment. Please use wall plugs depending on the condition of the wall. The wall must be sufficiently strong, i.e. it should ideally be a solid load-bearing wall. In the case of a plasterboard wall or similar thin walls, however, a special technique must be used. If in doubt, please ask the architect or landlord about the condition of your walls. Please note that you are only purchasing the product described here, not any other modules, decorative items or accessories. Colours may be displayed differently depending on the monitor settings. You can purchase the complete wall unit - as shown - here: Livitalia Wall unit C45

The al2 Mobius 004 design TV lowboard has a base and feet made of smoked solid eucalyptus wood. This gives the TV lowboard a unique look. The front has two large hinged doors that can be opened and closed without handles by simply pressing lightly on the front. Each hinged door has another partition in the centre. The body, the flap door fronts and the metal edging of the legs are matt lacquered in colour. The Mobius 004 designer lowboard is complemented by the Mobius 005 lowboard, the Mobius 003 sideboard and the Mobius 001 dining table from this series. Dimensions: The Mobius 004 TV lowboard is available in 5 widths: W 160 cm / H 50 cm / D 50 cm (inside width per compartment 4x W 36.8 cm)W 180 cm / H 50 cm / D 50 cm (inside width per compartment 4x W 41.8 cm)W 200 cm / H 50 cm / D 50 cm (inside width per compartment 4x W 46.8 cm)W 220 cm / H 50 cm / D 50 cm (inside width per compartment 4x W 51.8 cm)W 240 cm / H 50 cm / D 50 cm (inside width per compartment 4x W 56.8 cm) Height of legs: 25 cm Interior height: 19.1 cm A cable aperture for electronic devices can be drilled into the rear wall on request. Material and colours: The body of the al2 Design lowboard is made of high-quality chipboard. It is available in various matt colours . You can choose from the most popular finishes: white, black, dark grey or light grey . Please note that the colour of the metal edging of the legs is always the same colour as the body and the hinged door front. Other colours are available on request. The legs are made of smoked solid eucalyptus wood Assembly: We deliver the al2 Design TV lowboard already partially pre-assembled. The lowboard only needs to be connected to the base. You can optionally book assembly in the shopping basket. Please also note that only the described product is available for purchase here, no decorative items or accessories. Colours may be displayed differently depending on the monitor settings.

Flat design lowboard from Greece by al2. The e-klipse 008 TV lowboard has a modern design with a diamond pattern. The lowboard has one or two drawers, a flap door in the centre and an optional open compartment. These are opened and closed by pressing on the front. The e-klipse 008 design lowboard stands on elegant legs, giving it a particularly light appearance despite its size. When ordering, please always choose between the closed version (drawer on the left, flap door in the centre, drawer on the right) and the open version (drawer on the left, flap door in the centre, open compartment on the right). In addition to the e-klipse 008 designer lowboard, there is also the e-klipse 005 lowboard, the e-klipse 003 sideboard and the e-klipse 009 highboard. Dimensions: The e-klipse 008 designer lowboard from al2 is available in 4 widths: W 180 cm / H 50 cm / D 50 cmW 200 cm / H 50 cm / D 50 cmW 220 cm / H 50 cm / D 50 cmW 240 cm / H 50 cm / D 50 cm Height of legs: 25 cm Interior height: 20.3 cm A cable aperture for electronic devices can be drilled into the rear wall on request. Material and colours: The body of the al2 Design lowboard is made of high-quality chipboard. It is available in various matt colours . You can choose from the most popular versions: white, black, dark grey or light grey. Other colours are available on request. Assembly: We deliver the al2 lowboard 008 already partially pre-assembled. The lowboard only needs to be connected to the plinth. You can optionally book assembly in the shopping basket. Please also note that only the described product is available for purchase here, no decorative items or accessories. Colours may be displayed differently depending on the monitor settings.

The modern Livitalia design wall unit C08 fits perfectly into narrow living rooms and offers the impression of a floating effect with its transparent feet. The highlight is the optional lighting on the lowboard and shelf. Customised adaptations are possible on request. This wall unit is manufactured and delivered exclusively to order in Italy. To plan your wall unit, we recommend purchasing our 3D planning & quotation package: 3D planning & quotation package Colours: The body and front of the lowboard are finished in dark oak (Carbone). The interior, on the other hand, is in matt black (similar to RAL 9011). The open compartment is also finished in matt black. The two feet are transparent (see-through). Each wall unit is produced individually for you and can be lacquered in any colour. Functions: Handleless lowboard with hinged door for electronic devices in the lower section and an open compartment. The lowboard has space for flat-screen televisions up to a maximum of 65 inches. The open compartment can be selected on the right or left. The lowboard stands on transparent legs. There is an open wall shelf on the left of the lowboard. Please note that wall mounting is required for the shelf. It does not necessarily have to be a load-bearing wall. A plasterboard wall also has the necessary load-bearing capacity because half of the shelf rests on it. Optional LED lighting can be ordered for the shelf and/or the lowboard. The LED lighting (3000K) is switched on by plugging the transformer into a socket. Alternatively, the transformer can be connected to a light switch by an electrician. Optionally, the LED lighting can be controlled via WLAN using a WLAN socket. Dimensions: W 240 cm / H 72 cm / D 45.2/54.6 cm Materials: The body and front of the lowboard are finished in high-quality oak. The wall shelf is also finished in oak. The feet of the base unit are made of methacrylate (acrylic). Assembly: All elements come pre-assembled, the wall unit only needs to be set up in the correct order. You can optionally book professional assembly in the shopping basket. Please also note that only the product described is for sale here, not any decorative items or accessories. Colours may be displayed differently depending on monitor settings.

The Punt Malmö design TV lowboard is part of a very special manufacturer series designed by Mario Ruiz and is characterised by simple shapes paired with high-quality materials. In addition to the vertically arranged slats of the accordion-style front section, the optional incredibly thin, glossy cover plates are also striking. Also worth mentioning are the rounded front edges above the flap doors, the beautiful grain of the veneer and the slim legs and feet. the plinth. The Malmö sideboard and Malmö highboard are also available to match the same series. Colours: The veneers used are Super Matt Oak, Super Matt Walnut or Dark Stained Oak . The colours metallic gold, metallic bronze or black lacquered glass are available for the cover plate. The steel base is available in the colour black RAL9005.Functions: The Punt Malmö design TV lowboard has one or more hinged doors - depending on your choice. These have no handles and can be opened and closed by pressing on the front. The narrow fittings are particularly striking. These allow the doors to be opened downwards at a right angle. The louvres on the hinged doors allow audio/video equipment behind them to be controlled by remote control and also ensure that heat is dissipated. There is an inner partition wall behind the hinged doors. The feet and plinth are height-adjustable to compensate for uneven floors. The lowboard has a cable aperture on its rear wall. Dimensions: This Malmö design TV lowboard from Punt is available in the following widths: W 172.9 cm / H 40.3 cm / D 45.5 cm (carcase only)W 162.8 cm / H 36.5 cm / D 40.8 cm (interior)W 54.6 cm | 54.6 cm | 53.5 cm (compartment widths) W 229.6 cm / H 40.3 cm / D 45.5 cm (pure carcase dimensions)W 218.5 cm / H 36.5 cm / D 40.8 cm (interior)W 54.6 cm | 54.6 cm | 54.6 cm | 54.6 cm (compartment widths) W 286.4 cm / H 40.3 cm / D 45.5 cm (pure carcase dimensions)W 272 cm / H 36.5 cm / D 40.8 cm (interior)W 54.6 cm | 54.6 cm | 53.5 cm | 54.6 cm | 54.6 cm (compartment widths) Height of the feet or of the base: 6 cm, 17 cm and 29 cm Materials: The body and the flap doors of the Punt Design TV lowboard Malmö are made of MDF boards E1 and chipboard E1. These are finished with either walnut or oak veneer . The slats of the flap doors are made of solid wood. The optional cover panels can be painted in gold or bronze metallic on request. The carcase stands on a steel base with powder-coated feet. Assembly: We deliver this Punt design lowboard already partially pre-assembled. You can also book optional assembly in the shopping basket. Please also note that only the described product is available for purchase here, no decorative items or accessories. Colours may be displayed differently depending on monitor settings.

The modern Livitalia design lowboard Roto is an ideal room divider and can be positioned between the kitchen and living room thanks to the swivelling TV panel. The front and back of the lowboard have the same look. When ordering, please note that you can add an extension module and/or boxes with glass doors to the Livitalia Roto lowboard. The Livitalia Roto designer lowboard with TV panel is available in various colours. The TV panel and the extension boxes are always lacquered in matt white. The lowboard can be ordered in either white (similar to RAL9016) or black matt (similar to RAL9011). Alternatively, the lowboard is finished with high-quality real wood veneer and is available in light oak (as illustrated), brown oak and grey oak. Functions: The hinged door can be opened by pressing on the front. Inside there is a partition wall and a tube that connects the cables of the devices inside the lowboard to the TV. The tube is open at the bottom so that cables can be fed into the tube from outside under the lowboard. The TV panel can be rotated by up to 360°. The swivelling TV panel has a width of 115 cm or 146.5 cm and can be fitted with a maximum TV set of up to 50 or 65 inches. A bracket of your choice can be attached to the panel. 120 and 150 cm Roto have a hinged door, the 180 cm Roto has 2x90 cm hinged doors. The optional boxes are fitted with a glass shelf. Can a soundbar be hung on the Roto TV panel?If required, there is space for a soundbar of your choice under the TV on the TV panel. If the soundbar has a wall bracket, this can simply be attached with wood screws. Alternatively, an extension can be screwed to the TV mount without drilling, to which the soundbar is attached. We recommend model HAMA 00108746. Dimensions: The Roto TV lowboard is available in the following sizes:Width: 120 / 150 cm / 180 cm Height: 25.5 / 33.5 cm Depth: 47 / 56.6 cmTotal height: minimum: 112 | maximum: 141cm The TV panel is available in two sizes: 115x84 cm for TVs up to 50 inches 146.5x105 cm for TVs up to 65 inches (only for 150 cm and 180 cm wide base units ) Depth of the panel: 11.5 cm Further dimensions:Internal dimensions: H 19.9/27.9 | D 41.4/50.6 cmMaterial thickness: 2 cmHinged door thickness: 2 cmBase height: 1.5 cm The Roto panel can be mounted at different distances from the base unit: for base unit height 25.5 cm: 1.9 cm | 9.9 cm | 17.9 cm - | total height 112 | 120 | 127 cmfor base unit height 33.5 cm: 1.9 cm | 9.9 cm - | total height 140 | 149 cm The dimensions of the extension modules are Width: 90 / 120 / 150 cm These can be arranged to the right or left of the Roto lowboard. Important: The 150 cm wide extension modules cannot be combined with the 180 cm wide Roto, as the maximum cover shelf length is 300 cm. The dimensions of the boxes are: 1x W 60 cm / H 48 cm / D 37.4 cm - With glass door2x W 45 cm / H 48 cm / D 37.4 cm - With lacquered front Important: Only the 120 and 150 cm extension modules are available with boxes, as only these offer sufficient storage space . Further dimensions:Interior dimensions: W 41/56 cm / H 44 cm / D 31.4 cmGlass front thickness: 2 cm Technical details: The lowboard can only be opened from one side via the hinged door. The hinged door is gently braked by hydraulic pistons. The hinges can be adjusted so that the door closes perfectly and the gaps are even. The lowboard stands on height-adjustable feet that can compensate for slight unevenness. The TV panel can be opened at the back so that all cables can be neatly routed and the TV can be screwed to the panel. The TV bracket for mounting the TV on the panel is not included and must be ordered separately depending on the TV model. We recommend the HAMA TV bracket (model: 118128); this fits many TV models very well. Mounting: The Roto lowboard comes to you pre-assembled and ready for transport. To begin assembly, the feet must be attached to the body of the room divider. Then attach the back panel to the body of the lowboard. The pre-assembled TV panel is then opened at the rear to adjust the support bar to the desired height. This allows you to customise the distance between the TV panel and the lowboard. Once the TV panel with the support rod has been inserted into the lowboard, all that remains to be done is to fit the TV bracket (not included) and hang the TV on it. All lacquered surfaces are covered with a protective film to ensure safe despatch. Before each delivery, the shipping company will contact you to arrange a personal appointment. Please note that you are only purchasing the product described here, not any other modules, decorative items or accessories. Colours may be displayed differently depending on monitor settings. You can purchase the complete wall unit - as shown - here: Livitalia Wall unit C46

Modern design wall unit C60 from Livitalia from Italy. The wall unit has an integrated column TV holder with cable routing in the lowboard. TV sets can be concealed behind the hinged door. One of the wall units has a hinged door that can be used as a desk when open. For a particularly modern touch, the wall unit has optional LED lighting. Individual customisations are possible on request. To plan your wall unit, we recommend purchasing our 3D planning & quotation package: 3D planning & quotation package Colours: After placing your order, a personal consultant will call you to discuss your colour preferences. Each wall unit is produced individually for you and can be lacquered in any colour. Functions: The LED lighting for the wall units and lowboards can be ordered as an option. The LED lighting (3000K) is switched on by plugging the transformer into a socket. Alternatively, the transformer can be connected to a light switch by an electrician. Optionally, the LED lighting can be controlled via WLAN using a WLAN socket. Dimensions: W 390 cm / H 160 cm / D 26.6/46.5/56.1 cm Assembly:All elements come pre-assembled, the wall unit only needs to be hung on the wall in the correct order. Individual elements can also be moved in position. Please use dowels depending on the wall condition. The wall must be sufficiently thick, i.e. in the best case it should be a solid load-bearing wall. In the case of a plasterboard wall or similar thin walls, however, a special technique must be used. If in doubt, please ask the architect or landlord about the condition of your walls. You can optionally book professional installation in the shopping basket. Please also note that only the product described can be purchased here, not any decorative items or accessories. Colours may be displayed differently depending on monitor settings.

The Stockholm TV design lowboard from Punt is a unique and unmistakable piece of furniture. For this reason, it has already been honoured with the coveted Red Dot Design Award. The design lowboard impresses with its thin aluminium top plate and the raised edges create an extraordinary play of light on the surface. The cover plate, which is so delicate, feels particularly valuable due to its cold feel and gives the viewer a good impression of the craftsmanship that has gone into the piece of furniture. Each Stockholm TV sideboard is only made to order for you in Spain. The Stockholm sideboard, the Stockholm highboard or the Stockholm high chest of drawers are also available to match the designer Stockholm TV lowboard. If you are looking for another designer TV lowboard to configure in dark walnut with legs, you can alternatively take a look at the Punt Malmö lowboard. Colours: The feet are lacquered in RAL9005 black matt. The colours of the anodised cover plate are gold, bronze and rose, while the colours of the body, slats and front are super matt oak, super matt walnut or dark stained oak (Stained Oak Ebony). Function: The Stockholm TV design lowboard is available as floor-standing with feet or for wall mounting . The Punt lowboards not only impress with their extraordinary design, but also with their function: The Stockholm lowboard has two infrared-permeable slatted doors behind which electronic devices can be easily operated. The slats also help to optimise heat exchange. There is a large aluminium flap on the cover plate, which can be folded up to store cables and power supply units if required. A bristle strip allows the cables to pass through and protects against dust. In the centre, under the flap, there is access to the interior, which allows devices in the lowboard to be connected to the TV on top. Two cable apertures in the rear panel allow easy power supply to the furniture. Dimensions: The Punt Stockholm TV lowboard is available in 3 widths: W 121.6 cm / H 52 cm / D 46 cm W 179.8 cm / H 52 cm / D 46 cm W 238 cm / H 52 cm / D 46 cmPlinth H 6 cm: Floor versionPedestal H 29 cm: Foot version The floor version stands on a 6 cm high plinth and provides sufficient clearance to open the doors easily and compensate for any unevenness in the floor. The optional base of the Stockholm sideboard has a height of 29 cm and has small height-adjustable feet to compensate for unevenness. The wall version has high-quality fittings with a high load-bearing capacity. Two wall fittings are installed per door element, resulting in a load capacity of up to 40 kg per running metre. Please note that due to the heavy weight of the furniture, a solid wall is required for wall mounting. Material: The carcass and the closed doors are made of sturdy MDF E1 and chipboard E1 (low formaldehyde content). These are finished with real wood veneer . Care is taken to ensure that the veneer pattern runs through all the doors and is not interrupted. The doors with slats are made of solid oak or walnut, depending on the version. The cover plate is made of rolled and anodised aluminium. The optional feet consist of a steel base with a thermo-lacquered, textured surface. Delivery includes The Punt Stockholm lowboard is delivered disassembled. Each door element is already pre-assembled. Depending on the width, the door elements must be connected and the aluminium cover plate fitted. Delivery is always free of charge with a two-man service to your home. You can optionally book professional assembly during the ordering process. Please use dowels depending on the condition of the wall. The wall must be sufficiently strong, i.e. it should ideally be a solid load-bearing wall. With a plasterboard wall or similarly thin walls, however, a special technique must be used. If in doubt, please ask the architect or landlord about the condition of your walls. Please also note that only the product described is for sale here, not any decorative items or accessories. Colours may be displayed differently depending on monitor settings.

The handleless Ozzio Brera TV media lowboard with its elegant elegant design answers the question of a sideboard with storage space on the one one side and a matching TV cabinet on the other. This piece of furniture furniture embodies the ideal combination of storage space and practical storage space for the TV. The central glass front in particular draws and yet its dark colour does not show everything. Colours: The Ozzio Design Lowboard Brera is available with doors and sides in and sides in black oak Carbone, natural oak or walnut, with the central glass front in smoke colour (Fume). the central glass front is finished in smoke colour (Fume). and base are always lacquered in Ardesia Matt. in the colour Graphite Matt. Functions: The Brera lowboard from Ozzio has 5 doors, one of which is a of which is a glass door. The handleless doors are easy to open and close. close. There is a glass shelf behind each door, which provides additional elegance. The media lowboard offers sufficient space for CD, DVD or Blue-Rays, but also for hi-fi devices such as DVD players, satellite or AV receiver. The electronic devices can even be controlled through the door which makes operation extremely convenient. A special highlight is the central glass front, which gives the TV lowboard a contemporary look. look. There is a cable duct in the rear wall so that all cables can be tidy and concealed. Please note that the "without feet" version feet" version only has small feet that are hidden so that the lowboard appears to lowboard appears to float just above the floor. With "with feet" the feet are also clearly visible. The middle module serves as the technology centre. You can store your electronic devices here. A smoked glass door lets infrared rays through so that the devices can be operated behind the door. There is a cable aperture in the centre of the rear wall so that you can connect all your devices. Dimensions: W 224 cm / H 44.5 cm / D 54.5 cm (without feet) W 224 cm / H 57 cm / D 54.5 cm (with legs) Materials: The front of the Ozzio Brera lowboard is finished with a high-quality oak veneer or walnut veneer. The centre front is made of glass. The stable base frame is made of metal in metal. Assembly: The Brera TV lowboard with glass front from Ozzio impresses with its simple assembly. assembly. This TV lowboard is pre-assembled and delivered to your home in a 2-man delivered to your home. All you have to do is connect the carcass to the base frame and then set it up. Care instructions: To preserve the longevity and beauty of your Ozzio X309 Brera TV media lowboard, we recommend regular care with a slightly damp microfibre cloth. moistened microfibre cloth. Avoid the use of harsh cleaning cleaning agents and make sure that no liquids remain on the surface for a long time. remain on the surface for a long time.

The Livitalia TV design wall unit C27 is suitable for wall mounting and offers optional LED backlighting. Open wall shelves in a dark wood look provide storage space for books. Closed wall units in matt grey are opened by pressing lightly on the front. The TV lowboard offers space inside for electronic devices. The integrated desk offers a small, quick work surface. Customisation is possible on request. If you are looking for another alternative to this designer wall unit in dark grey with integrated desk, you can take a look at the Livitalia wall unit C44 with swivel TV panel. To plan your wall unit, we recommend purchasing our 3D planning & quotation package: 3D planning & quotation package Colours: After placing your order, a personal consultant will call you to discuss your colour preferences. Each wall unit is produced individually for you and can be lacquered in any colour. Functions: The LED lighting (3000K) is switched on by plugging the transformer into a socket. Alternatively, the transformer can be connected to a light switch by an electrician. Optionally, the LED lighting can be controlled via WLAN using a WLAN socket. Optional dividers (inside) for the Cartesio wall unit are available on request. Dimensions: W 450 cm / H 180 cm / D 35.4/56.1 cm Assembly:All elements come pre-assembled, the wall unit only needs to be hung on the wall in the correct order. Individual elements can also be moved in position. Please use dowels depending on the wall condition. The wall must be sufficiently thick, i.e. in the best case it should be a solid load-bearing wall. In the case of a plasterboard wall or similar thin walls, however, a special technique must be used. If in doubt, please ask the architect or landlord about the condition of your walls. You can optionally book professional installation in the shopping basket. Please also note that only the product described can be purchased here, not any decorative items or accessories. Colours may be displayed differently depending on monitor settings.